Focal ELEAR User Manual

Manuel d'installation ELEAR / ELEAR User manual
Contenu du packaging
ìER°WHGHUDQJHPHQW
ìFDVTXH(OHDU
ìF¤EOH02)&$:*
ìHQYHORSSHFRQWHQDQW
 PDQXHOGåXWLOLVDWLRQ
 EUDQGFRQWHQW
 PDQXHOGHJDUDQWLH
Package contents
ì1 case
ì 1 Elear headphone
ì 1 OFC (4m; AWG 24) cable
ì 1 envelope containing:
1 user manual
1 brand content
1 warranty guide
Branchement du casque
&KDTXH H[WU«PLW« GX F¤EOH SRVVªGH XQ LQGLFDWHXU  / SRXU JDXFKH HW 5 SRXU
GURLWHfig.1YHLOOH]¢ELHQOHUHVSHFWHUORUVTXHYRXVEUDQFKH]OHF¤EOHDX[HQWU«HV
/HW5LQGLTX«HVVRXVOHVRUHLOOHWWHV¢F¶W«GHVFRQQHFWHXUVfig. 2
Connecting the headphones
Each end of the cable is labelled with either an "L" for left, or an "R" for right (fig.1). Make
sure you connect each end of the cable to the correct headphone inputs which are also
labelled "L" and "R" under each earpiece next to the inputs. (fig.2).
Amplification
3RXUSURILWHUDXPLHX[GHVTXDOLW«VVRQRUHVGXFDVTXH(OHDUQRXVYRXVFRQVHLOORQV
GHYRXV«TXLSHUGåXQDPSOLILFDWHXU'$&VS«FLILTXH7\SH'$&9GH1DLPfig. 3
5HOLH]OHFDVTXH¢OåDPSOLILFDWHXUJU¤FHDXFRQQHFWHXU-DFNPP
Amplification
To get the best sound quality out of your Elear headphones, we recommend equipping
yourself with a specific amplifier/DAC (such as Naim’s DAC V1) (fig. 3). Connect the
headphones to the amplifier using the 1/4" (6.35mm) jack.

Rangement
9RXVSRXYH]UDQJHUOHFDVTXHDYHFOHVF¤EOHVFRQQHFW«VGDQVODER°WHGHUDQJHPHQW
6LYRXVG«VLUH]G«FRQQHFWHUOHVF¤EOHVLOYRXVVXIILUDVLPSOHPHQWGHOHVUHWLUHUSXLV
GHSODFHUOHVGHX[SLªFHVGDQVOHVHPSODFHPHQWVSU«YXV¢OåLQW«ULHXU GH OD ER°WH
GHUDQJHPHQW
Storage
You can place your headphones with the cable plugged in into its case. If you want to
disconnect the cable from the headphones, remove them and then place the separate
components in their relative compartments in the case.
Soin et entretien
,O HVW SU«I«UDEOH GH QHWWR\HU U«JXOLªUHPHQW YRWUH FDVTXH SRXU «YLWHU WRXW ULVTXH
GåXVXUH 3RXU FHOD QRXV YRXV UHFRPPDQGRQV GåXWLOLVHU XQ FKLIIRQ SURSUH VHF HW
QRQSHOXFKHX[,OSHXWDUULYHUDSUªVGHQRPEUHXVHVXWLOLVDWLRQVTXHOHVFRXVVLQHWV
PRQWUHQWGHVPDUTXHVGåXVXUH'DQVFHFDVVLYRXVOHG«VLUH] LOHVWSRVVLEOHGH
OHV UHPSODFHU 5DSSURFKH]YRXV GH YRWUH UHYHQGHXU DILQ GH YRXV HQ SURFXUHU
GHV QRXYHDX[ ,O YRXV VXIILW HQVXLWH GH G«FOLSVHU OD SDLUH XVDJ«H HQ WLUDQW HW GH
UHSRVLWLRQQHUODQRXYHOOHSDLUHVXUOHVRUHLOOHWWHVfig. 4)
Care and maintenance
It is advisable to clean your headphones regularly to limit wear and tear. We recommend
using a clean, dry lint-free cloth. After a lot of use, wear marks may be visible on the ear
cushions. In this case, if you wish to, the ear cushions can be replaced. Ask your local Focal
retailer for replacement parts. The ear cushions are easy to unclip, by pulling them, and to
clip back into place by pushing them back onto the ear-pieces. (fig. 4)

Focal ELEAR Specifications

General

Impedance	80 Ω
Driver unit	40 mm
Ear coupling	Circumaural
Headphone frequency	5 - 23000 Hz
Headphone sensitivity	104 dB
Total Harmonic Distortion (THD)	0.3 %
Cable type	OFC
Cable length	4 m
Product color	Aluminium, Black
Wearing style	Head-band
Detachable cable	Yes
Package depth	260 mm
Package width	326 mm
Package height	164 mm
Material	Aluminium, Leather
Connectivity technology	Wired

Weight and Dimensions

Weight	450 g