Focal
®
is a trademark of Focal-JMLab
®
- www.focal.com - SCAA200507/1
IS FORD 165
Product Data Sheet
Polyglass cone
Natural sound without coloration
Butyl surround
Excellent durability
Vehicle dedicated connector
No welding
and no cables to cut
Chassis-integrated spacer
Perfect integration
in the original locations
Aluminium inverted
dome tweeter
Smoothness and definition
of sound in every directions
Check your vehicle compatibility
at www.focal-inside.com
Key Points
• Quick and easy install
• No modifications needed on the vehicle
• Invisible integration
• Sound quality superior to the original one
• No additional accessories required
The IS FORD 165 2-way component kit is designed for all drivers who wish to replace their original audio
system with a quality sound solution. The speaker drivers employ Polyglass technology, which delivers well-
defined midrange and bass, and the Aluminium inverted dome tweeter, a Focal technology that provides
perfect treble reproduction. This kit is designed for vehicles that have tweeter slots.
[Ford: Kuga, Ranger front locations, F-Series, Focus, Fiesta... /
Lincoln: MKX, Navigator rear locations...]
Type 2-way component kit
Power max.
120W
Power nom.
60W RMS
Sensitivity (2.83V/1m)
91.7dB
Frequency response
60Hz - 20kHz
Impedance
4
Woofer
6
1/2
"
(165mm)
Mounting depth
1⁄" (42.5mm)
Cone
Polyglass
Voice coil diameter
1" (25mm)
Magnet
Ferrite
Surround
Butyl
Tweeter
Compact Aluminium
inverted dome
Crossover
Woofer : integrated
Tweeter : on line
Isolation foam rings
Continuous insulation
between the speaker drivers
and the door fitting
To Next Page
Loading...
