Bluetooth Association
Use instructions
Universal Wireless Receiver
User manual
5
1. The receiver must be free : the LED is blinking.
2. Go on your device bluetooth association menu
3. Select the "Focal Wireless Receiver"
4. When the association is done, the LED do not blink anymore, you hear two bips
5. Push play in your music player to listen to your music.
Info: To free up the receiver : disable the bluetooth association between your recei-
ver and the device already associated. After disabling, you hear two bips, the
LED should be blinking.
Once your bluetooth compliant device is associated, you will automatically be re-
connected to your receiver when your device will be within the range. You can play
your music and sound from any software player.
If, after pushing play button in your software player, your music is not played. Be
sure your device is associated with the receiver by checking your device bluetooth
menu. Repeat association process if needed.
To Next Page
Loading...