Fogmaker is a registered trade mark of the fire extinguisher described in this manual. It is designed for
extinction of burning petrol, diesel, oil etc. in engine rooms or other enclosed spaces. The extinguisher
uses a cold water-mist, which reduces the temperature very effectively. At the same time it drives out
the air, so that the oxygen level is reduced. Full effect is obtained when the extinguishant is vaporized.
Fogmaker Universal consists of the following parts:
General description Section 1.1
Installing the Cylinder Section 1.5
Valve Hose Section 2.2
Release Valve Section 2.1
Manual Activation Section 3.1
Electrical Activation Section 3.2-3.3
Pneumatic Activation - Firetrace Section 3.4
Pipes Section 4.1-4.2
Couplings Section 4.3-4.3.2
Firetrace Components Section 4.5
Nozzles Section 4.6
Double-assembled Extinguisher Section 5
Cover Boxes Section 5
Installations in Racing Cars Section 5.3
Functionality Check after Installation Section 6
Measures in the Event of Fire Section 7
Measures after Fire Section 8
Checklist Schedule Section 9
Restoring the Function after a Fire Section 10
Winter Storage Section 11
Technical Data Section 12
The pipes are not exposed to pressure until the release valve has been activated.
Fogmaker Universal User ManualFogmaker
Universal User Manual
Fogmaker
Universal, User Manual, Page 2 (20) Edition 2002 Fogmaker
Universal, User Manual, Page 19 (20) Edition 2002
12. Technical Data
Type Universal 33 Universal 40
Measures (mm) Measures (mm)
Diameter excl. assembly fittings 152 152
Maximum measure from wall incl. assembly fittings 165 170
Maximum width incl. assembly fittings 152 390
Length (height) incl. valve 400 445
Hole distance on assembly fittings w 350, h 280 (M8)
Weight
Filled cylinder incl. assembly fittings (approx. kg) 11 23
Volume, pressure
Volume, extinguishant (approx. litres) 3.3 4.0
Volume, driving gas (approx. litres) 66 80
Load pressure (at +20
o
C) 100-105 bar 100-105 bar
Test pressure, cylinder (bar) 144 144
Materials
Cylinder Extruded durable aluminium
Assembly fittings Aluminium, stainless stell fastening clamps
Valve Brass, components of stainless steel
Anodizing, all aluminium parts, interior & exterior Min 20 µm Min 20 µm
Discharge time (approx, seconds)
2 nozzles 120
4 nozzles 60 78
6 nozzles 40 52
8 nozzles 30 39
Fogmaker 66 Fogmaker 80
10 nozzles 48 62
12 nozzles 40 52
Nozzle flow at 100 bar Approx. 80 litres/hour per nozzle
Other specifications
Driving gas Nitrogen
Extinguishant Water, antifreeze and film-forming agents
Anti-freeze temperature (standard) -35
o
C
Functionality tests and technical approvals:
Institute Standard Date
SAQ Kontroll AB AFS 1994:39 97-02-12
Pressure vessel approval (-40/+65
o
C)
Swedish National Testing and Research Institute (SP)
Swedish Administration of Extinguishing test 96-06-18
Shipping and Navigation Regulations 1996-01-11 in 5 m
3
space
International Car Sport Federation (FIA) Art. 253 Safety Equipment 96-12-02
Homologation No. Ex.001.97, Techn. List No. 16 (Groups N, A, B, ST)
Swedish Administration of
Shipping and Navigation Type approval 97-02-04
Leisure boats, engine compartment < 5 m
3
Swedish Fire Safety Association (SBF) RUS 127 98-05-18
Approval of extinguishing capacity in peat loader
Fullscale test (SBF) for homologation with
regard to water quantity.
SBF 127 01-09-15
Approval extinguishing capacity 1.2 litres/m
3 SBF 127 01-09-15
To Next Page
Loading...