for Living 088-0383-0 - User Manual

1 of 6
Assembly Instructions
088-0383-0
gardenview gazebo
WARNING
In order to reduce the risk of personal injury and damage to equipment, basic safety precaution should always
be followed when assembling and using this product. Read all instructions carefully before assembly and use.
 Some parts may contain sharp edges. Wear protective gloves if necessary.
 In order to ensure safe assembly, it is recommended that this product be assembled by at least two
people.
 Keep children and pets away from the assembly area.
 Begin the assembly at least 6’ (1.8 m) away from any obstruction, such as a fence, garage, house,
overhanging branches, laundry line, or electrical wires.
 Install this gazebo on level ground. This gazebo cannot be permanently stacked or attached to a
concrete floor or platform. This gazebo is intended for decorative and sunshade purposes only, and is
not designed to withstand harsh weather, including high winds, rain, and snow.
 Verify that all nuts and bolts are tightly secured before and during use.
 Remove the canopy or take other precautions in high wind conditions.
 Anchor or stake a minimum of four (4) locations of the unit to the ground for added safety and security.

Summary

Assembly Step 1

Connect Posts and Panels

Assemble the base structure by connecting posts and side panels using specific hardware from Hardware Pack 1.

Assembly Step 2

Install Top Frame and Canopy

Attach slanting bars, the top connector, and the large canopy to the assembled frame using Hardware Pack 2.

Assembly Step 3

Attach Fixtures and Netting

Secure frame fixtures and the bar table board, then hang mosquito netting using Hardware Pack 3.

Care and Maintenance

Product Care Guidelines

Protect the gazebo from rust by touching up scratches and minimizing surface oxidation with included paint.

for Living 088-0383-0 Specifications