Forch 3885 53 - Rechargeable LED-Inspection Lamp 4+1; Operation

Rechargeable LED-Inspection Lamp 4+1
Please read these instructions thoroughly in order to being able to fully utilize the
features of this device and to avoid faulty operation! Please keep the instructions for
later read and pass them on to other users of this device.
Scope of supply:
■ 1× rechargeable LED-inspection lamp 4+1
■ 1× charger with USB port
■ 1× USB cable
■ 1× hand strap
■ 1× user’s manual
Technical data:
■ Art-No.: 3885 53
■ Illuminant: 1 × 1 W SMD LED
4 × 0,5 W SMD LED
■ Battery: Lithium-Ion battery pack,
3,7 V/1.400 mAh
■ Charging time: approx. 4 h
■ Lamp functions: head lamp side lamp
■ Luminous flux: up to 100 lumens up to 150 lumens
■ Lighting time: up to 5 h up to 3 h
■ Operating temperature: -10 °C up to +45 °C
■ Input: 100 – 240 V, 50/60/Hz
■ Magnets: with 2 integrated holding magnets
■ Clip: 90° pivoting
■ Length: 175 mm
■ Weight: approx.110 g
■ Charger: AC 100 – 240 V 50/60 Hz 5.0v /1.0 A .
Operation:
Startup:
1) Load completely before first operation
2) In case you store the lamp for a longer period, make sure to load it before storing
(minimum after 3 months)
Power ON / OFF:
1) Switch on the side lamp, press button 1×
2) Switch on the head lamp press button 2×
3) Switch the lamp off press button 3×
Charge the battery:
1) connect USB-charger and USB-charging cable
2) connect the charger to the power supply
ENG