148
[RE09750(ALL)09/93]
half page art:0032248-B
Positioning spare tire
[RE09900(ALL)02/95]
4. Replace the wheel lug bolts, but do not fully
tighten them until you lower the car. If you
do, you could force the car off the jack.
[RE10000(ALL)02/95]
5. Remove the retaining tool and replace it
with the final lug bolt.
[RE10090(ALL)07/95]
Your vehicle is built with metric (12 mm)
threads on the wheel hubs and lug bolts. Make
certain, during wheel removal, the same bolts
removed are reinstalled, or if replaced, bolts
with metric threads and the same chamfer
configuration are used.
[RE10100(ALL)07/95]
RWARNING
Installation of an English thread lug bolt
into a metric hub will not properly secure
the wheel to the hub. Damaged lug bolts
may result in wheel separation and
possible injury.
File:12icref.ex
Update:Wed Jan 24 14:52:09 1996
To Next Page
Loading...
