Ford 1996 Contour - Page 133

Electronic Sound Systems
133
*
[AS24000(ALL)02/95]
Adjusting the tone balance and speaker output of your
radio
*
[AS24100(ALL)04/95]
■ Increasing or decreasing bass response
*
[AS24225(ALL)05/95]
Push the “AUDIO” button repeatedly until the display reads
“BASS.” Push the right (+) side of the “VOLUME” button to
increase bass (more “lows”), and push the left (–) side to
decrease bass (less “lows”).
*
[AS24300(ALL)04/95]
■ Increasing or decreasing treble response
*
[AS24425(ALL)05/95]
Push the “AUDIO” button repeatedly until the display reads
“TREB.” Push the right (+) side of the “VOLUME” button to
increase the treble (more “highs”), and push the left (–) side
to decrease treble (less “highs”).
*
[AS24600(ALL)04/95]
■ Adjusting speaker balance
*
[AS24725(ALL)05/95]
Balance control allows you to adjust the sound distribution
between the right and left speakers. Push the “AUDIO”
button repeatedly until the display reads “BAL.” Push the
right (+) side of the “VOLUME” button to shift the sound to
the right speakers, and push the left (–) side to shift the
sound to the left speakers.
*
[AS24800(ALL)04/95]
■ Adjusting speaker fader
*
[AS24925(ALL)05/95]
Fade control allows you to adjust the sound distribution
between the front and rear speakers. Push the “AUDIO”
button repeatedly until the display reads “FADE.” Push the
right (+) side of the “VOLUME” button to shift the sound to
the front speakers, and push the left (–) side to shift the
sound to the rear speakers.
*
[AS24950(ALL)04/95]
NOTE: Illuminated bars in the display show relative levels of
bass and treble, and positions of speaker balance and
fader functions (left to right, front to rear).
File:cdaso.ex
Update:Thu Jan 25 12:21:48 1996