67
%
*
[SS09370(ALL)02/96]
Automatic locking mode
*
[SS09380(ALL)01/96]
In this operating mode, the shoulder belt
retractor will be automatically locked and will
remain locked when the combination
lap/shoulder safety belt is buckled, and does not
allow the occupant freedom of movement. This
mode provides the following:
*
[SS09390(ALL)01/96]
❑
A tight lap/shoulder belt on the occupant.
*
[SS09400(ALL)01/96]
❑
Child safety seat installation.
*
[SS09410(ALL)05/96]
WARNING
Rear-facing child seats or infant carriers
should never be placed in the front seats.
*
[SS09420(ALL)01/96]
This mode must be used when installing a child
safety seat on the front passenger seat and rear
outboard seats where dual locking retractors are
provided.
*
[SS09430(ALL)01/96]
To switch the retractor from the emergency
locking mode to the automatic locking mode,
perform the following steps:
*
[SS09440(ALL)02/96]
1. Buckle the lap/shoulder combination belt.
*
[SS09450(ALL)01/96]
2. Grasp the shoulder portion of the belt and
pull downward until all of the belt is
extracted and, when allowed to retract, a
clicking sound is heard. At this time, the belt
retractor is in the automatic locking mode
(child restraint mode).
*
[SS09460(ALL)02/96]
3. A clicking sound will continue to be heard
as the belt is allowed to retract. This
indicates that the retractor is in the
automatic locking mode.
File:06icssf.ex
Update:Tue Mar 4 08:54:10 1997