50. Connect hose to evaporative emission canister purge valve (EVAP canister purge valve) (9C915).
51. Reconnect A/C suction hose to accumulator and discharge line to condenser. Evacuate and refill with
refrigerant as outlined in Section 12-00 .
52. Route belt as illustrated but do not wrap over alternator pulley. With wrench, rotate engine drive belt
tensioner clockwise and slide belt over alternator pulley.
Number Description
1 N801731-S2 U-Nut
2 N804639-S2 U-Nut
3 N606692-S2 Screw and Washer Assembly
4 N606677-S2 Screw and Washer Assembly
5 8260 Upper Radiator Hose Install with Stripe at 12:00
O'Clock Position
6 8592 Water Hose Connection
7 8501 Water Pump
8 8286 Lower Radiator Hose Install with Stripe at 12:00
O'Clock Position
9 8146 Fan Shroud
10 8005 Radiator
11 17B613 Reservoir
12 8075 Radiator Overflow Hose
A — Tighten to 6-8 Nm
(53-71 Lb-In)
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B39.HTM~gen~ref.HTM
To Next Page
Loading...
