EasyManuals Logo

Ford 1998 Contour User Manual

Ford 1998 Contour
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
Starting
85
STARTING THE ENGINE
1. Turn the key to the start
position (4) without pressing the
accelerator pedal and release as
soon as the engine starts. The key
will return to the on (3) position.
3
4
2
1
2. If the engine does not start
within five seconds, wait ten
seconds and try again.
3. If the engine does not start in
two attempts OR the temperature
is below -12°C (10°F), depress the
accelerator pedal and start the
engine while holding the
accelerator pedal down. Release
accelerator pedal when the engine
starts.
Vehicles equipped with the 2.0 l
engine: If the engine fails to start,
continue to crank with the
accelerator depressed about 1/4 of
the way down and hold that
position until the engine starts.
DO NOT crank for more than
30 seconds or you could damage
the starter.
4. After idling for a few seconds,
apply the brake and release the
parking brake
CDW IVA1_2 Starting en C 5/15/97 8:50 PM Page 85

Other manuals for Ford 1998 Contour

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ford 1998 Contour and is the answer not in the manual?

Ford 1998 Contour Specifications

General IconGeneral
BrandFord
Model1998 Contour
CategoryAutomobile
LanguageEnglish

Related product manuals