60/40 Split Rear Seat (if equipped)
When folded down, the rear seats
provide a “load floor” for additional
storage space. To fold down the rear
seats:
• Pull the straps to lower the seat
cushions.
• Store the center safety belt in the
opening on the seat back.
When returning the seats to their
normal position:
• Clear the load floor before folding
the seat up.
• Make sure the seat cushion is
latched into place.
• Remove the center safety belt from its stowed position.
Check to assure that 60/40 Split rear seat cushion is latched by
pulling up and forward on lap belt buckles.
Using the armrest (if equipped)
Push the release control to move
the armrest up or down.
Seating and safety restraints
88
To Next Page
Loading...
