Turn the fan speed control to the
desired speed.
Turn the temperature control to
regulate the air temperature.
Turn the mode selector control to
determine the airflow location.
When FLOOR is selected, airflow
will be directed through the floor
register in the third row passenger
seating. When PANEL is selected,
airflow is directed through the overhead registers of the second and
third row seating. To blend airflow between each location, select any
position between PANEL and FLOOR.
Rear auxiliary climate controls
The rear auxiliary climate controls
are located in the headliner of the
second row seating. To control the
auxiliary unit using the rear
auxiliary climate control, the front
auxiliary climate control must be in
the REAR position.
Turn the fan speed control to the
desired speed.
FLOORPANEL
WARMCOOL
FLOORPANEL
OFF
LO
HI
COOL
WARM PANEL FLOOR
LO
OFF
HI
Climate controls
76
To Next Page
Loading...
