The Safety Canopy娂 is mounted to roof side-rail sheet metal, behind the
headliner, above the first and second row seats. In certain lateral
collisions or rollover events, the Safety Canopy娂 system will be
activated, regardless of which seats are occupied. In certain rollover
events, the Safety Canopy娂 on both sides of the vehicle will be inflated,
regardless of which seats are occupied. The Safety Canopy娂 is designed
to inflate between the side window area and occupants to further
enhance protection provided in side impact collisions and rollover events.
The fact that the Safety Canopy娂 did not activate in a collision does not
mean that something is wrong with the system. Rather, it means the
forces were not of the type sufficient to cause activation. The Safety
Canopy娂 is designed to inflate in certain side impact collisions or
rollover events, not in rear impact, frontal or near-frontal collisions,
unless the collision causes sufficient lateral deceleration or rollover
likelihood.
Several Safety Canopy娂
system components get hot
after inflation. Do not touch them
after inflation.
If the Safety Canopy娂
system has deployed, the
Safety Canopy娂 will not
function again unless replaced.
The Safety Canopy娂 system
(including the A, B and C
pillar trim) must be inspected
and serviced by a qualified
technician in accordance with
the vehicle service manual. If
the Safety Canopy娂 is not
replaced, the unrepaired area will
increase the risk of injury in a
collision.
2004 Expedition (exd)
Owners Guide (post-2002-fmt)
USA English (fus)
Seating and Safety Restraints
181
To Next Page
Loading...
