• To return to Overdrive mode, press the transmission control switch.
The O/D OFF lamp will not be illuminated.
• Overdrive mode is automatically returned each time the key is turned
off.
3 (Third)
This position allows for third gear only.
• Provides engine braking.
• To return to D (Drive) without Overdrive, move the transmission shift
lever into the D (Drive) position.
• Selecting 3 (Third) at higher speeds will cause the transmission to
downshift to third gear at the appropriate vehicle speed.
2 (Second)
This position allows for second gear only.
• Provides engine braking.
• Use to start-up on slippery roads.
• To return to D (Drive) without Overdrive or 3 (Third), move the
transmission shift lever into the D (Drive) or 3 (Third) position.
• Selecting 2 (Second) at higher speeds will cause the transmission to
downshift to second gear at the appropriate vehicle speed.
1 (First)
This position allows for first gear only.
• Provides maximum engine braking.
• Will not downshift into first gear at high speeds; will cause the
transmission to downshift to a lower gear, then allows for first gear
when the vehicle reaches slower speeds.
Forced downshifts
• Allowed in Overdrive or Drive.
• Depress the accelerator to the floor.
• Allows transmission to select an appropriate gear.
2005 05+ Mustang (197)
Owners Guide (post-2002-fmt)
USA (fus)
Driving
160
To Next Page
Loading...
