Fluid Ford Part
Name
Application Capacity
Rear axle
lubricant
2
Motorcraft SAE
75W-140
Synthetic Rear
Axle Lubricant
7.5 inch axle
(V6)
3.25 pints (1.5L)
8.8 inch axle
(V8)
4.25 pints (2.0L)
Fuel tank N/A All 16.0 gallons
(60.6L)
Transmission
fluid –
Automatic
3
Motorcraft
MERCON威V
ATF
All 11.9 quarts
(11.2L)
4
Transmission
fluid – Manual
3
Motorcraft
MERCON威 ATF
4.0L V6 engine 2.75 quarts
(2.6L)
5
4.6L V8 engine 3.2 quarts
(3.0L)
5
Windshield
washer fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
All 4.0 quarts
(3.8L)
1
Add the coolant type originally equipped in your vehicle.
2
Rear axle lubricants do not need to be checked or changed unless a
leak is suspected, service is required or the axle assembly has been
submerged in water. The axle lubricant should be changed any time the
rear axle has been submerged in water. Fill 1/4 inch to 9/16 inch (6 mm
to 14 mm) below bottom of fill hole. Add 4 oz. (118 ml) of Additive
Friction Modifier XL–3 or equivalent meeting Ford specification
EST-M2C118–A for complete refill of Traction-Lok axles.
3
Ensure the correct automatic transmission fluid is used. MERCON威 and
MERCON威 V are not interchangeable. DO NOT mix MERCON威 and
MERCON威 V. Refer to your scheduled maintenance information to
determine the correct service interval.
4
Approximate dry capacity, includes cooler and tubes. Fluid level should
be checked by a qualified service technician.
5
Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
2005 05+ Mustang (197)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
228
To Next Page
Loading...
