1.16 Load Distribution—Specifications
1.16.1 Load Distribution Calculations - Driver and Passenger Weight
Distribution
CAUTIONS:
Do not exceed the axle plated
weights.
Do not exceed the gross vehicle
weight
Tire manufacturer specification must
be maintained.
NOTE: Uneven load distribution could result in
unacceptable handling and braking
characteristics.
NOTE: The centre of mass of the payload should
be located within the wheelbase of the vehicle
NOTE: Avoid one-sided load distribution.
NOTE: For further information please contact
your local National Sales Company representative,
or Local Ford Dealer. If they are unable to help
you then please contact the Vehicle Converter
Advisory Service at VCAS@ford.com.
FordTransit 2006.5 (April 2006–)
Date of Publication: 12/2006
1 General Information
44
To Next Page
Loading...
