Ford 2008 F-150 - Cargo Area Features; Cargo Management System

To remove the bed extender:
1. Extend the bed extender.
2. Pull the lever on each side of the
bed extender to unlock it.
Make sure the locking clip screws
are loose before removing the bed
extender.
3. Press the locking clips below the
middle bar and lift the bed extender
out of the channels on the “D” pillar.
To install the bed extender, follow the removal procedure in reverse
order.
CARGO AREA FEATURES (IF EQUIPPED)
Cargo management system (if equipped)
The cargo management system consists of the Cargo rail package with
the following as optional accessories:
• Front header bar (if equipped)
• Cross bars (if equipped)
• Bed divider (if equipped)
• Side mounted tool bins (if equipped)
2008 F-150 (f12)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
137