119
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
KNOWING
YOUR CAR
IN AN
EMERGENCY
BULB TYPES fig. 10
Various types of bulbs are fitted to
your car:
A Glass bulbs: they are pressure-fit.
Pull to extract.
B Bayonet-type bulbs: to remove
this type of bulb from its holder,
press the bulb and turn it counter-
clockwise.
C Tubular bulbs: release them
from their contacts to remove.
D Halogen bulbs: to remove
the bulb, release the clip holding
the bulb in place.
E Halogen bulbs: to remove
the bulb, release the clip holding
the bulb in place.
KA00110m
fig. 10
If possible, we recommend
that you let Ford Dealership
replace the bulbs. The
correct operation and
aiming of the outer lights are
absolutely essential for the safety of
the car and of compliance with law.
IMPORTANT The headlight inner
surface might be slightly misted: this
should not be considered irregular
rather a natural phenomenon due to
low temperature and the air humidity
level. Misting will disappear as soon
as the headlights are turned on.
The presence of drops inside the
headlights indicates infiltration of water.
Go to a Ford Dealership.
105-132 Ford KA EN 08/04/14 08:39 Pagina 119
To Next Page
Loading...
