26
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
KNOWING
YOUR CAR
Backrest tilting fig. 16
To tilt the seat, operate lever D
(movement a) and push the backrest
forward to lock (movement b); release
lever D and push the backrest to slide
the seat forward (movement c, applies
only to seats with easy entry).
Backrest angle adjustment fig. 14
Turn knob B.
Seat height adjustment
(where provided) fig. 15
Operating lever C it is possible to lift
or lower the rear area of the cushion
to achieve the most comfortable driving
position.
Driver side, where equipped
with position memory
To return the seat to its initial position,
slide the seat back and press on the
backrest to lock the seat (movement
d) operate lever D (movement e)
and raise the backrest (movement f)
until it clicks home.
ATTENTION Using lever D before
locking the seat in its original position
causes the original seat position to be
lost. In this case, adjust the seat position
by means of the reach adjustment fig. 13.
Driver side and passenger side
where not equipped with position
memory
To return the seat to its initial position,
slide the seat back and press on the
backrest (movement d) operate lever
D (movement e) and raise the
backrest (movement f) until it clicks
home. Adjust reach using lever A-fig. 13.
The type of reattachment manoeuvre
has been chosen to guarantee the safety
of the occupant. If the mechanism
detects an obstacle (e.g. a handbag)
and cannot restore the seat to its
original position, it allows the
reattachment of the seat, positioning
the backrest only, ensuring that the
guides are attached.
fig. 13
KA00211m
fig. 14
To Next Page
Loading...
