To return the seatback to the floor
from tumbled position, rotate the
seat down until you hear it latching
to the floor.
To return the seatback to the
upright position
• Lift the seatback toward the rear
of the vehicle, and
• Rotate the seatback until you
hear a click, locking it in the
upright position.
Note: The seatback will not raise if
the rear latch hooks are not
properly engaged to the floor
striker.
• Pull the head restraint back up to its normal adjusted position.
Before returning the seatback to its original position, make sure
that cargo or any objects are not trapped behind the seatback.
After returning the seatback to its original position, pull on the
seatback to ensure that it has fully latched. An unlatched seat may
become dangerous in the event of a sudden stop or collision.
2008 Taurus X (219)
Owners Guide (post-2002-fmt)
USA (fus)
Seating and Safety Restraints
162
To Next Page
Loading...
Need help?
General
