Item Capacity Ford part name
Ford part number /
Ford specification
Manual transmission
fluid
5 .8 quarts (5.5L) Full Synthetic Oil
XT-M5-QS /
WSS-M2C200-C
Automatic transmission
fluid
4
17.5 quarts
(16.6L)
5
Motorcraft MERCON威
LV ATF
XT-10-QLV / MERCON威
LV
1
Includes heater and 5.0 quarts (4.7L) in coolant recovery.
2
Includes 1 quart (1.0L) in oil filter.
3
Only use coolant meeting Ford specifications for topping off and coolant changes. Using any
other coolant may result in vehicle damage.
4
Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are
indicated on the dipstick blade or the dipstick handle. Check the container to verify the fluid being
added is of the correct type. Refer to your scheduled maintenance information to determine the
correct service interval.
5
Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and
if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set
by the indication on the dipstick’s normal operating range.
Maintenance and Specifications
60
2010 Econoline (eco)
Supplement (supplement), 1st Printing
USA (fus)
To Next Page
Loading...
