Item Capacity
Ford part name or e
quivalent
Ford part number / Ford
specification
Fuel tank
19.0 gallons
(71.9L)
——
1
Add the coolant type originally equipped in your vehicle.
2
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C930-A and the API Certification mark.
3
Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and
if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set
by the indication on the dipstick’s normal operating range. Police or Handling Package refill
capacity- 12.8 quarts (12.1L).
4
Use of any fluid other than the recommended fluid may cause transmission damage. Refer to
scheduled maintenance information to determine the correct service interval.
5
Rear axles are considered lubricated for life when the vehicle is used for normal service. For
severe duty requirements, see Exceptions and/or Special Operating Conditions in scheduled
maintenance information.
6
Service refill capacities are determined by filling the rear axle 1/4 inch to 9/16 inch (6 mm to
14 mm) below the bottom of the filler hole.
7
Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification
EST-M2C118-A for complete refill of Traction-Lok rear axles.
Maintenance and Specifications
264
2011 Crown Victoria (cro)
Owners Guide, 1st Printing
USA (fus)
To Next Page
Loading...
Need help?
General
