Item Capacity
Ford part name or
equivalent
Ford part number /
Ford Specification
Automatic transmission
fluid
9.0 quarts (8.5L)
6
Motorcraft威
MERCON威 LV ATF
7
XT-10-QLV /
MERCON威 LV
Manual transmission
fluid
2.4 quarts (2.3L)
8
Motorcraft威 SAE 75W-90
Gear Oil
XT-4 -QGL /
WSS-M2C203-A1 and
GL-4
Windshield washer
fluid
Fill as required
Motorcraft威 Premium
Windshield Washer
Concentrate (US)
Premium Quality
Windshield Washer Fluid
(Canada)
ZC-32-A (US)
CXC-37-(A, B, D, and
F) (Canada) /
WSB-M8B16-A2/- -
Fuel tank
17.5 gallons
(66.2L)
——
1
Add the coolant type originally equipped in your vehicle. Check the coolant reservoir bottle
labeling for the correct fluid type to use.
2
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C930-A and the API Certification mark.
3
The power transfer unit is lubricated for life with synthetic lube. Lubricant levels are not to be
checked or changed unless a leak is suspected or repair required. Replace power transfer unit
lubricant with specified synthetic lubricant anytime the unit is submerged in water.
4
Fill to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.
5
4X4 vehicles exposed for prolonged periods to temperatures less than -40°F (-40°C) should
change out the rear axle fluid to Motorcraft威 SAE 75W-140 Synthetic Rear Axle Lubricant, Ford
part number XY-75W140-QL meeting Ford specification WSL-M2C192-A.
Maintenance and Specifications
326
2011 Escape (204)
Owners Guide, 2nd Printing
USA (fus)