Oil Change Service Interval* 1 23456789101112131415
Change engine oil and filter • ••••••••••••••
Rotate tires, inspect tire wear and measure
tread depth
• ••••••••••••••
Inspect wheels and related components for
abnormal noise, wear, looseness or drag
• ••••••••••••••
Inspect front axle and U-joints; lubricate if
equipped with grease fittings (4WD vehicles)
• ••••••••••••••
Perform multi-point inspection (recommended) • ••••••••••••••
Inspect automatic transmission fluid level (if
equipped with dipstick); consult dealer for
requirements
• ••••••••••••••
Inspect brake pads, shoes, rotors, drums, brake
linings, hoses and parking brake
• ••••••••••••••
Inspect engine cooling system for strength, and
hoses
• ••••••••••••••
Inspect exhaust system and heat shields • ••••••••••••••
Inspect half-shaft boots (if equipped) • ••••••••••••••
Inspect steering linkage, ball joints, suspension,
tie-rod ends, driveshaft and U-joints; lubricate
if equipped with grease fittings
• ••••••••••••••
Inspect cabin air filter (if equipped) • •••••••
*Oil change service intervals should be completed as indicated by the instrument cluster message center
Reset your Intelligent Oil Life Monitor™ after each engine oil and filter change; refer to the Instrument Cluster chapter
Scheduled Maintenance Guide
346
2011 Escape (204)
Owners Guide, 1st Printing
USA (fus)
To Next Page
Loading...
