Condition Potential Causes
I accidentally programmed all
keys as MyKeys威
• Vehicle has a non Ford-approved
remote start system that is recognized
as an admin key. Refer to the Using
MyKey威 with remote start systems
section to reset all MyKeys威 as admin
keys.
No MyKey威 function with (if
equipped) intelligent access
key with push button start
• An admin intelligent access key is
present at a push-and-start vehicle.
• No MyKeys威 are programmed to the
vehicle. Refer to Create a MyKey威
section.
• Vehicle has been started using a
non Ford-approved remote start
system (as an admin key) then a
MyKey威 is inserted without restarting
the engine.
MyKey威 programmed total
includes one additional key
• Unknown key has been programmed
to the vehicle as a MyKey威.
• Vehicle is equipped with a non
Ford-approved remote start system.
Refer to Using MyKey威 with remote
start systems section.
Admin keys programmed total
includes one additional key
• Unknown key has been programmed
to the vehicle as admin key.
• Vehicle is equipped with a non
Ford-approved remote start system.
Refer to Using MyKey威 with remote
start systems section.
MyKey威 distance does not
accumulate
• MyKey威 is not being used by the
intended user.
• MyKey威 system has been recently
cleared.
• Vehicles has been started using a
non Ford-approved remote start
system (as an admin key) then a
MyKey威 is inserted without recycling
the MyKey威 in ignition.
Locks and Security
149
2012 F-150 (f12)
Owners Guide, 3rd Printing
USA (fus)
To Next Page
Loading...
