3. Follow Steps 1-4 in the Create a MyKey威 section.
Note: For all vehicles, the number of MYKEY(S) PROGRAMMED or
ADMIN KEYS PROGRAMMED that is displayed in the MyKey威 system
status menus will include the remote start system as an additional key in
the total count. See the Check MyKey威 system status section.
Note: For all vehicles with remote start installed, it is possible to
program all original vehicle keys as MyKeys威, in which case, you will
need to use your remote start system to reset all MyKeys威 as admin keys
by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Clear MyKey威 section.
Troubleshooting
Condition Potential Causes
Can’t create a
MyKey威
• Key in the ignition is already a MyKey威
• Key in the ignition is the last remaining admin
key (there always has to be at least one admin
key)
• SecuriLock威 passive anti-theft system is
disabled or in unlimited mode
• Vehicle has been started using a remote start
system that is programmed as MyKey威. Refer to
Using MyKey威 with remote start systems
section.
Cannot program the
MyKey威 optional
settings
• Key in the ignition is a MyKey威
• No MyKeys威 are programmed to the vehicle.
Refer to Create a MyKey威 section
• Vehicle has been started using a remote start
system that is programmed as MyKey威. Refer to
Using MyKey威 with remote start systems
section.
Locks and Security
126
2012 Flex (471)
Owners Guide, 2nd Printing
USA (fus)
To Next Page
Loading...
Need help?
General
