EasyManua.ls Logo

Ford 2012 Mustang - Page 315

Ford 2012 Mustang
350 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Capacity
Ford part name or
equivalent
Ford part number /
Ford Specification
Windshield washer fluid Fill as required
Motorcraft Premium
Windshield Washer
Concentrate (US)
Premium Quality
Windshield Washer Fluid
(Canada)
ZC-32-A (US)
CXC-37-(A, B, D and F)
(Canada) /
WSB-M8B16-A2/- -
Fuel tank
16.0 gallons
(60.6L)
——
1
Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification
EST-M2C118-A for complete refill of Traction-Lok axles.
Ford design rear axles contain a synthetic lubricant that does not require changing unless the axle
has been submerged in water.
2
Automatic transmissions that require MERCON LV should only use MERCON LV fluid. Refer to
scheduled maintenance information to determine the correct service interval. Use of any fluid
other than the recommended fluid may cause transmission damage.
3
Add the coolant type originally equipped in your vehicle.
4
Approximate dry capacity, including cooler and tubes. Fluid level should be checked by an
authorized dealer.
5
Service refill capacity is covered under Checking and adding manual transmission fluid in this
chapter.
6
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C945-A and the API Certification mark.
Maintenance and Specifications
315
2012 05+ Mustang (197)
Owners Guide, 3rd Printing
USA (fus)
Information Provided by:

Table of Contents

Other manuals for Ford 2012 Mustang

Related product manuals