4. Partially tighten the lug nuts in the
sequence shown.
5. Lower your vehicle and remove the
jack.
6. Fully tighten the lug nuts in the
sequence shown. See Technical
Specifications (page 193).
7. Install the wheel trim using the ball of
your hand.
WARNING
Have the lug nuts checked for
tightness and the tyre pressure
checked as soon as possible.
Stowing the Flat Tyre
1. Unblock the wheels.
2. Place the flat tyre on the luggage
compartment floor.
3. Locate the cargo tie-down near the
seatback. Push the loop of the retainer
strap through the tie-down. Thread the
other end through the loop.
To Next Page
Loading...
