EasyManua.ls Logo

Ford 2013 FUSION HYBRID - High-Voltage System - Do Not Cut Zones

Ford 2013 FUSION HYBRID
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FCS-15129-13 2013 Fusion MKZ Hybrid Emergency Response Guide
15
APPROACHING A DAMAGED HIGH-VOLTAGE VEHICLE - CONTINUED
6. High-Voltage System - Do Not Cut Zones
• If possible, remove the high-voltage battery service disconnect before
attempting any extrication procedure. Always assume the high-voltage cabling
and components are powered up.
If occupant extrication is necessary, always use caution when cutting near the
vehicle high voltage system components. Do not cut any of the high-voltage
under vehicle or under hood cabling (all high-voltage cabling is orange in color).
High-voltage cabling runs from the high-voltage batteries under the left hand
side of the vehicle to the underhood compartment. Refer to the diagram below
for no cut zones in orange.

Other manuals for Ford 2013 FUSION HYBRID

Related product manuals