3. From the rear of the vehicle, fold
the seat back by pulling and holding
the number 1 strap while pushing
the seat back forward. Release the
strap once the seat back starts
rotating forward.
4. Release the cushion latches by pulling the
number 2 strap while pulling on the strap
located at the top of the seat back to tumble
the seat all the way into the tub in the floor.
Note: Do not use the seat anchors as cargo tie downs.
Note: Do not use the third-row seat back as a
load floor when the seat back is folded.
Note: Make sure that the area under the seat is free of objects before
stowing it.
1
174 Seats
2014 Explorer (exp)
Owners Guide gf, 1st Printing, April 2013
USA (fus)
To Next Page
Loading...
