Use oil and fluids that meet the defined
specification and viscosity grades.
Note: If you unable to find an engine oil that
meets the specification defined by
WSS-M2C913-D, you must use an SAE
5W-30 engine oil defined by ACEA A5/B5
for top-up only.
If you use oil and fluids that do not meet
the defined specification and viscosity
grades this may lead to:
• component damage which may not be
covered by the vehicle Warranty.
• longer engine cranking periods.
• increased emission levels.
• reduced engine performance.
• reduced fuel economy.
TECHNICAL SPECIFICATIONS - 1.6L ECOBOOST™
Capacities
CapacityItem
6.1 qt (5.8 L)Engine cooling system
4.3 qt (4.1 L)Engine lubrication system - including the oil filter
4 qt (3.8 L)Engine lubrication system - excluding the oil filter
0.8 qt (0.75 L)Engine oil top-up - raise the level on the dipstick
from minimum to maximum
12.7 gal (48 L)Fuel tank
1.8 qt (1.7 L)Automatic transmission
2.6 qt (2.5 L)Windshield and rear window washer system -
including headlamp washer
Specifications
Materials
SpecificationName
WSS-M2C945-AMotorcraft® SAE 5W-20 Premium Synthetic Blend
Motor Oil
XO-5W20-QSP
WSS-M2C200-D2Motorcraft® Dual Clutch Transmission Fluid
XT-11-QDC
WSD-M2C200-CMotorcraft® Full Synthetic Manual Transmission Fluid
XT-M5-QS
WSS-M97B44-D2Motorcraft® Orange Antifreeze/Coolant Prediluted
VC-3DIL-B
201
Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013
Maintenance
To Next Page
Loading...
