Ford 2015 Fiesta - Changing a Bulb - 4-Door

E102590
3
4
3. Disconnect the electrical connector.
4. Remove the headlamp.
Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector correctly.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the retaining clips.
CHANGING A BULB - 4-DOOR
WARNINGS
Switch the lamps and the ignition off.
Let the bulb cool down before
removing it.
Do not touch the glass of the bulb.
Note: Only fit bulbs of the correct
specification.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
Note: Remove the covers to gain access to
the bulbs.
BA
C
D
E159827
Side markerA
Headlamp low beamB
Headlamp high beamC
Direction indicatorD
Side Marker
1. Remove the headlamp. See
Removing a Headlamp (page 188).
E161707
A
2. Remove the bulb holder.
3. Remove the bulb.
Headlamp Low Beam
1. Remove the headlamp. See
Removing a Headlamp (page 188).
189
Fiesta (CCT), enUSA, Second Printing
Maintenance