1. Remove the retaining screws that
secure the air filter housing cover.
2. Carefully lift the air filter housing cover.
3. Remove the air filter element from the
air filter housing.
4. Wipe any dirt or debris from the air filter
housing and cover to make sure no dirt
gets in the engine and to make sure you
have a good seal.
5. Install a new air filter element. Be
careful not to crimp the filter element
edges between the air filter housing
and cover. This could cause filter
damage and allow unfiltered air to
enter the engine if not correctly seated.
6. Install the air filter housing cover.
7. Install the retaining screws to secure
the air filter housing cover to the air
filter housing.
TECHNICAL SPECIFICATIONS - 1.0L ECOBOOST™
Capacities
CapacityItem
4.3 qt (4.1 L)Engine lubrication system – including the oil filter
4.0 qt (3.8 L)Engine lubrication system – excluding the oil filter
0.8 qt (0.75 L)Engine oil top-up – raise the level on the dipstick
from minimum to maximum
6.1 qt (5.8 L)Engine cooling system
12.4 gal (47 L)Fuel tank
Between MIN/MAX on brake fluid
reservoir
Brake fluid
1.8 qt (1.7 L)Manual transmission
2.6 qt (2.5 L)Windshield and rear window washer system -
including headlamp washer
24 oz (0.68 kg)A/C refrigerant
4.2 fl oz (125 ml)A/C refrigerant compressor oil
200
Fiesta (CCT), enUSA, Second Printing
Maintenance
To Next Page
Loading...
