1. Remove the jumper cable from the
ground metal surface.
2. Remove the jumper cable on the
negative (-) terminal of the booster
vehicle's battery.
3. Remove the jumper cable from the
positive (+) terminal of the booster
vehicle's battery.
4. Remove the jumper cable from the
positive (+) terminal of the disabled
vehicle's battery.
After the disabled vehicle has been started
and the jumper cables removed, allow it
to idle for several minutes so the engine
computer can relearn its idle conditions.
POST-CRASH ALERT SYSTEM
The system flashes the direction indicator
lamps in the event of a serious impact that
deploys an airbag (front, side, side curtain
or Safety Canopy) or the safety belt
pretensioners.
The lamps turn off when:
• You press the hazard control button.
• Your vehicle runs out of power.
• You press the unlock button in the
remote control.
TRANSPORTING THE VEHICLE
106
Figo (CDU) , E4B5 19A321 ZCA enIND, Edition date: 06/2015, Second Printing
Roadside Emergencies
To Next Page
Loading...
