Ford 2015 Figo - Page 177

9. Press the OK button twice to confirm
your phone as the primary device for
all future connections.
10. LOAD PHONEBK will then be
displayed on the audio unit. Press the
OK button twice to confirm that the
contents of your phonebook are
downloaded to the system.
11. The Bluetooth device name is
displayed on the audio unit.
Note: Some devices may not accept this
pairing procedure. If these instructions do
not work for your device, follow the
instructions using the radio.
Note: Once a device is paired as primary, it
will automatically connect to the radio, if
the bluetooth is enabled on both the radio
and the device.
Using the radio
1. Enable Bluetooth in your cell phone.
For information on phone settings, refer
to your phone user guide.
2. Press the PHONE button and then
keep pressing the MENU button to
scroll to the ADD DEVICE display.
Press the OK button.
3. Select the VIA RADIO and press OK.
4. Once VIA AUDIO has been selected
SEARCHING will be displayed on the
radio display.
5. Select the desired Bluetooth device
from the list found by your audio unit
and press OK.
6. Type any PIN number in the radio with
6 digits.
7. Check if the number on the radio
display matches the number displayed
on your phone and confirm pairing if
prompted.
8. Once pairing has been successful SET
PRIMARY will be displayed on the
radio display.
9. Press the OK button twice to confirm
your phone as the primary device for
all future connections.
10. LOAD PHONEBK will then be
displayed on the audio unit. Press the
OK button twice to confirm that the
contents of your phonebook are
downloaded to the system.
11. The Bluetooth device name is
displayed on the audio unit.
Phonebook Downloading
If your phonebook was not downloaded
during initial Bluetooth pairing follow this
process:
1. Press the PHONE button and then
keep pressing the MENU button to
scroll to the LOAD PHONEBK display.
2. Press the OK button.
Deleting a Paired Device or Phone
To remove a paired device follow this
process:
1. Press the PHONE button and then
keep pressing the MENU button to
scroll to the DEL DEVICE display.
2. Press the OK button. The first paired
device name will be shown. Scroll using
the up and down arrow buttons and
select the required device name. Select
option YES using the arrow buttons.
3. Press OK to unpair the device.
Privacy Mode
You can transfer a call from hands free to
private mode during an active call.
Press the MENU button until PRIVACY
appears, then press the OK button to
transfer. To return to hands free mode,
press the dial button.
175
Figo (CDU) , E4B5 19A321 ZCA enIND, Edition date: 06/2015, Second Printing
Audio System