KEYLESS STARTING
Failure to Start
If you are unable to start your vehicle, do
the following.
1. Hold the passive key next to the symbol
on the steering column.
2. With the passive key in this position, you
can use the button to switch the ignition
on and start your vehicle.
DIESEL PARTICULATE FILTER
During regeneration at low speed or engine
idle, you may smell a hot metallic odor and
could notice a clicking metallic sound. This
is due to the high temperatures reached
during regeneration and is normal.
HILL START ASSIST
The system makes it easier to pull away
when your vehicle is on a slope without the
need to use the parking brake.
When the system is active, your vehicle will
remain stationary on the slope for two to
three seconds after you release the brake
pedal. This allows you time to move your
foot from the brake to the accelerator
pedal. The brakes are released
automatically once the engine has
developed sufficient drive to prevent your
vehicle from rolling down the slope.
BRAKES
Emergency Brake Assist
Emergency brake assist detects when you
brake heavily by measuring the rate at
which you press the brake pedal. It provides
maximum braking efficiency as long as you
press the pedal. Emergency brake assist
can reduce stopping distances in critical
situations.
Anti-lock Brake System
This system helps you maintain steering
control and vehicle stability during
emergency stops by keeping the brakes
from locking.
CRUISE CONTROL
Cruise control lets you maintain a set speed
without keeping your foot on the
accelerator pedal. You can use cruise
control when your vehicle speed is greater
than 20 mph (30 km/h).
USING CRUISE CONTROL
Switching Cruise Control On
Setting a Speed
1. Accelerate to the desired speed.
2. Press and release SET+.
10
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3586en enGBR, Edition date: 09/2014, Second Printing
To Next Page
Loading...
