INSTRUCTION BOOK
'-...__-.,,-.,,..
'------
~
~M
~
---!.lttttfa:4" N'l"I
Fillur• 21
Steering Ge r Auembly
THE RUNNING GEAR
Care of Running Gear
37
Every few weeks the front and rear axles should be carefully
gone over to see that all nuts and connections are tight, with
co ter pins in place. The sprang clips should be inspected
occasionally to see that they are tight.
The Front Wheels
The front wheels should be jacked up periodically and tested
for smoothness of running and excessive side play. To determine
if there is excessive side play, grasp the sides of the tire and shake
the wheel. Do not mistake loose spindle bushings for loose bear-
ings. Insert a cold chisel between spindle and axle when making
this test to take up any spindle bushing play,
To Next Page
Loading...
