Item Capacity Ford part name
Ford part number /
Ford specification
Fuel tank
(front-wheel drive)
19.2 gallons
(72.7L)
——
Fuel tank (all-wheel
drive)
20.8 gallons
(78.7L)
——
1
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C930-A and the API Certification mark.
2
Add the coolant type originally equipped in your vehicle.
3
Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and
if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set
by the indication on the dipstick’s normal operating range.
4
Check the transmission dipstick for the correct fluid type to use. Refer to scheduled
maintenance information to determine the correct service interval. Use of any fluid other than
the recommended fluid may cause transmission damage.
5
See your authorized dealer for fluid level checking or filling.
Maintenance and Specifications
313
2009 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)
To Next Page
Loading...
