2. Switch your vehicle off to let the
system cool and reset the fault mode.
3. Switch your vehicle back on, but do not
plug your device back in.
4. With your vehicle on, make sure the
indicator light remains on.
5. Make sure your device does not exceed
the power limits and then plug in your
device.
Note: If a fault occurs again, your device
may exceed the capacity available from the
power outlet.
146
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Power Outlet - Vehicles With: 120V Power Outlet
To Next Page
Loading...
