WHAT IS START IN GEAR
Crank in gear allows the driver to restart
the engine and launch the vehicle after
stalling in four-wheel drive low (4L). Use
the information displayed on the cluster
to direct you when to apply the brake and
push the start button. While driving off
road, it is possible to stall the engine trying
to maneuver terrains. Trying to restart your
vehicle by using the clutch or shifting into
neutral to restart the engine can be difficult
and cause potential roll back situations
when driving uphill.
Note: Crank in gear is an alternate name
for the feature.
START IN GEAR
PRECAUTIONS
Always press the brake pedal when
starting the vehicle to prevent unwanted
vehicle movement, and release after
starting to drive away. Start in gear is only
possible with the brake pedal pressed.
START IN GEAR LIMITATIONS
You can only use start in gear in four-wheel
drive low (4L).
USING START IN GEAR
When driving difficult terrains in four-wheel
drive low (4L), it is possible to stall the
engine when your vehicle is not able to
maintain speed. To easily start the engine
and launch your vehicle, perform the
following steps:
1. After the vehicle stalls an information
message displays in the cluster, To
start in gear select YES and press
OK.
2. Firmly press the brake pedal when in
gear and press and hold the Start
button.
3. When the engine starts and your
vehicle begins to move, release the
brake pedal.
159
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Start in Gear - Manual Transmission
To Next Page
Loading...
