Ford BRONCO 2022 - Manual Transmission; Manual Transmission Precautions; Shifting Into Reverse; Crawler Gear

MANUAL TRANSMISSION
PRECAUTIONS
WARNING: Always set the parking
brake fully and make sure you shift the
gearshift lever to first gear. Switch the
ignition off and remove the key whenever
you leave your vehicle.
Failure to fully press the clutch pedal to
the floor may cause increased shift efforts,
premature wear to transmission
components or damage the transmission.
Do not drive with your foot resting on the
clutch pedal or use the clutch pedal to hold
your vehicle at a standstill when waiting
on a hill. These actions reduce the life of
the clutch and could nullify a clutch
warranty claim.
SHIFTING INTO REVERSE
Reverse (R)
1. Press the clutch pedal to the floor to
disengage clutch.
2. Shift into reverse (R) by raising the
collar below the gearshift knob up, then
moving the lever fully to the left, then
forward.
E99067
Note: You can only move the gearshift lever
to reverse (R) by raising the collar below the
gearshift knob up before shifting to reverse.
This is a lockout feature which protects the
transmission from accidentally engaging
reverse (R) when intending to select first
(1).
If reverse (R) is not fully engaged press the
clutch pedal, return the gearshift to the
neutral position, then release the clutch
pedal. Re-apply the clutch pedal, then lift
the gearshift collar and shift into reverse
(R) again.
Note: Do not move the transmission
selector lever to reverse (R) gear when your
vehicle is moving. This can cause damage
to the transmission.
Note: Make sure that your vehicle is at a
complete stop before you shift into reverse
(R). Failure to do so could damage the
transmission.
CRAWLER GEAR
WHAT IS CRAWLER GEAR
Allows you to cruise at ultra low speeds
with the clutch fully engaged, when driving
through obstacles and jagged terrain.
USING CRAWLER GEAR
Crawler (C)
Shifting into crawler gear:
1. Press the clutch pedal to the floor to
disengage clutch.
2. Shift into crawler (C) by raising the
collar below the gearshift knob up, then
moving the lever fully to the left, then
backward.
174
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Manual Transmission