BRAKE SHIFT INTERLOCK
WHAT IS BRAKE SHIFT
INTERLOCK
Brake shift interlock prevents you from
shifting out of park (P) when you have
switched the ignition on and not pressed
the brake pedal.
BRAKE SHIFT INTERLOCK
PRECAUTIONS
WARNING: Do not drive your
vehicle until you verify that the
stoplamps are working.
WARNING: When doing this
procedure, you need to take the
transmission out of park (P) which
means your vehicle can roll freely. To
avoid unwanted vehicle movement,
apply the parking brake prior to doing
this procedure. Use wheel chocks if
appropriate.
WARNING: If the parking brake is
fully released, but the brake warning
lamp remains illuminated, the brakes
may not be working properly. Have your
vehicle checked as soon as possible.
USING BRAKE SHIFT INTERLOCK
1. Insert a screwdriver between the shifter
boot material and trim ring to access
the retainer tabs from the top panel
trim ring.
2. Lift the shifter boot upward.
3. Locate the release lever on the side of
the transmission selector lever.
4. Using a screwdriver, move the release
lever toward the front of the
transmission selector lever.
5. When holding the release lever in the
forward position, move the
transmission selector lever out of the
park (P) position and into another gear.
AUTOMATIC TRANSMISSION
AUDIBLE WARNINGS
Transmission Not In Park(P)
Audible Warning
Sounds if any of the following occur:
180
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Automatic Transmission (If Equipped)
To Next Page
Loading...
