1. Bring your vehicle to a speed of 0 mph
(0 km/h).
2. For vehicles with an automatic
Transmission, place in neutral (N). For
vehicles with a manual transmission,
fully depress the clutch pedal.
3. Push the 4L on the four-wheel drive
mode selector.
Note: A 4x4 Shift in Progress message
appears in the information display indicating
the shift is in progress. If any of the previous
shift conditions are not met, the shift should
not occur and the information display can
guide the driver through the proper shifting
procedures.
Note: If Shift Delayed Drive Forward
displays in the information display, place
the transmission in a forward gear, move
your vehicle forward approximately 5 ft
(1.5 m), and shift the transmission back to
neutral (N) to allow the transfer case to
complete the range shift.
Note: When the light is solid, the system
has achieved the desired four-wheel drive
mode. When a selected four-wheel drive
mode LED is blinking, the system is
attempting to shift to that specific
four-wheel drive mode.
Note: When all lights are blinking have your
vehicle serviced as soon as possible.
Note: When you achieve recreational
towing, all lights are off and the instrument
cluster displays Neutral Tow Enabled Leave
Transmission in Neutral.
FOUR-WHEEL DRIVE MODES
TWO-WHEEL DRIVE HIGH
Two-wheel drive high is for general
on-road driving. Power is sent to the rear
wheels only.
Note: Two-wheel drive high can turn on or
off based on Drive Mode selection See
G.O.A.T. Mode Control (page 242).
FOUR-WHEEL DRIVE AUTO (If
Equipped)
Four-wheel drive auto provides
electronically controlled four-wheel drive
power to both the front and rear wheels,
as required, for increased traction in varying
on-road conditions. The four-wheel drive
auto tuning varies based on selected Drive
Mode. See Selecting a Four-Wheel Drive
Mode (page 184).
Note: Four-wheel drive auto can turn on or
off automatically based on Drive Mode
selection. See Selecting a Four-Wheel
Drive Mode (page 184).
FOUR-WHEEL DRIVE HIGH
Four-wheel drive high provides
electronically or mechanically locked
four-wheel drive power to both the front
and rear wheels for use in off-road or
winter conditions such as deep snow, sand
or mud. This mode is not for use on dry
pavement.
Note: Four-wheel drive high can turn on or
off automatically based on Drive Mode
selection.
FOUR-WHEEL DRIVE LOW
Four-wheel drive low provides
electronically or mechanically locked
four-wheel drive power to both the front
and rear wheels for use on low traction
surfaces, but does so with additional
gearing for increased torque multiplication.
This mode is only for off-road conditions
such as deep sand, steep slopes, or pulling
heavy objects.
186
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Four-Wheel Drive
To Next Page
Loading...
