Ford BRONCO 2022 - Four-Wheel Drive Indicators; Transfer Case Fluid Capacity and Specification; Four-Wheel Drive - Troubleshooting

Note: Four-wheel drive low can turn on or
off automatically based on drive mode
selection.
FOUR-WHEEL DRIVE
INDICATORS
Two-wheel Drive High
E181778
Illuminates briefly when
two-wheel drive high is selected.
Four-wheel Drive Auto (If Equipped)
E181781
Illuminates when four-wheel
drive auto is selected.
Four-wheel Drive High
E181779
Illuminates when four-wheel
drive high is selected.
Four-wheel Drive Low
E181780
Illuminates when four-wheel
drive low is selected.
TRANSFER CASE FLUID
CAPACITY AND
SPECIFICATION
See Transfer Case Fluid Capacity and
Specification (page 413).
FOUR-WHEEL DRIVE –
TROUBLESHOOTING
FOUR-WHEEL DRIVE – WARNING
LAMPS
Illuminates when a four-wheel
drive or power train fault is
present.
Note: When a system fault is present, the
system can typically remain in whichever
mode was selected prior to the fault
condition occurring. It does not default to
two-wheel drive in all circumstances. When
this warning is displayed, have your vehicle
serviced by an authorized dealer.
FOUR-WHEEL DRIVE – INFORMATION MESSAGES
DetailsMessage
Displays when the driver attempts to shift into four-
wheel drive low when traveling at too high of a speed.
For 4L slow to a stop
Displays when the driver attempts to shift into four-
wheel drive low without the transmission in neutral
(N).
For 4L Shift to N
Displays when the driver attempts to shift into four-
wheel drive low without the clutch pedal pressed.
For 4L press Clutch
Displays when the driver attempts to shift out of four-
wheel drive low when traveling at too high of a speed.
To exit 4L slow to a stop
187
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Four-Wheel Drive