Ford BRONCO 2022 - Stability Control Indicator

ESC Features
Traction Control
Systems
Electronic
Stability Control
Stability Control
Off Light
ModeButton Func-
tions
EnabledEnabledOn during bulb
check
Default - Trac-
tion Control On
and Normal
Advancetrac
Default at start-
up
DisabledEnabledOnTraction Control
Off
Button
momentarily
pressed - single
press
DisabledDisabledOnAdvanceTrac
Off
Button pressed
and held for five
seconds
EnabledEnabledOffReturn to
Default
Button pressed
when Traction
Control Off or
Advance Trac
Off
Note: Do not use the AdvanceTrac Off
setting on public roadways.
If a fault occurs in either the stability
control or the traction control system, you
may experience the following conditions:
• The stability and traction control light
illuminates steadily.
• The stability control and traction
control systems do not enhance your
vehicle's ability to maintain traction of
the wheels.
If a driving condition activates either the
stability control or the traction control
system you may experience the following
conditions
• The stability and traction control light
flashes.
• Your vehicle slows down.
• Reduced engine power.
• A vibration in the brake pedal.
• The brake pedal is stiffer than usual.
• If the driving condition is severe and
your foot is not on the brake, the brake
pedal may move as the system applies
higher brake force.
STABILITY CONTROL
INDICATOR
E138639
If it does not illuminate when you
switch the power on, or remains
on, this indicates a malfunction.
Have your vehicle checked by an
authorized dealer as soon as possible.
206
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Stability Control