Ford BRONCO 2022 - Page 213

TRAIL ONE PEDAL DRIVE
LIMITATIONS
Trail one pedal drive is unavailable when
any of the following occur:
• Your vehicle is not in four-wheel drive
high (4H) or four-wheel drive low (4L)
modes.
• Using cruise control.
• Using trail control.
• You exceed 30 mph (48 km/h).
Releasing the accelerator pedal may allow
your vehicle to come to a complete stop,
some situations may require you to press
the brake pedal to come to a complete
stop.
SWITCHING TRAIL ONE PEDAL
DRIVE ON AND OFF
E343599
Switching Trail One Pedal Drive On
Press the trail features button when in
four-wheel drive high (4H) or four-wheel
drive low (4L) to activate trail one pedal
drive.
Switching Trail One Pedal Drive
Off
Press the trail features button again to
switch trail one pedal drive off.
Selecting a driveline mode other than
four-wheel drive high (4H) or four-wheel
drive low (4L) switches trail one pedal
drive off.
If you exceed 42 mph (68 km/h) trail one
pedal drive switches off.
Pressing either button when trail
one pedal drive is active turns
trail control on and places trail
one pedal drive into standby
mode.
Switching from Trail Control to
Trail One Pedal Drive
When using trail control in
four-wheel drive high (4H) or
four-wheel drive low (4L)
modes, you can switch to trail one pedal
drive by pressing the button on the steering
wheel.
TRAIL ONE PEDAL DRIVE
INDICATORS
E328584
1
When trail one pedal drive is
active, the indicator displays
green in the instrument cluster.
When the system is switched on but is
unavailable or in standby mode, it displays
grey.
209
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Trail Control (If Equipped)