Ford BRONCO 2022 - Stabilizer Bar Disconnect Indicators; Stabilizer Bar Disconnect - Troubleshooting

Note: The gray indicator stays on until
either the vehicle speed reduces and the
stabilizer bar disconnects, or the system
turns off.
The stabilizer bar system also turns on and
disconnects when you select the Rock
Crawl drive mode. See Selecting a
G.O.A.T. Mode (page 242).
Note: The stabilizer bar disconnect is not
available in certain drive modes. See
Selecting a G.O.A.T. Mode (page 242).
Note: The stabilizer bar disconnect could
be delayed during wheel slippage, dynamic
maneuvers, dynamic cornering or when
there is an anti-lock brake system or
electronic stability control event in progress.
Switching the Stabilizer Bar
Disconnect Off
Switch the system off by pressing the
stabilizer bar disconnect button, which
reconnects the stabilizer bar if currently
disconnected.
The stabilizer bar disconnect system also
turns off when any of the following occur:
• The engine is switched off.
• You switch out of four-wheel drive low
(4L) or four-wheel drive high (4H).
• You select a drive mode that does not
allow the stabilizer bar to disconnect.
Note: The stabilizer bar can be reconnected
at any time. It is not necessary for the
vehicle to be on a level surface as the
stabilizer bar self-aligns.
STABILIZER BAR DISCONNECT
INDICATORS
E329476
An indicator illuminates when
you switch the stabilizer bar
disconnect system on. The color
of the indicator changes to indicate the
system status.
Amber indicates that the stabilizer bar is
disconnected.
Grey indicates that the stabilizer bar is
connected and in standby.
Red indicates that there is a fault with the
system, have the system checked as soon
as possible.
STABILIZER BAR DISCONNECT
– TROUBLESHOOTING
STABILIZER BAR DISCONNECT –
INFORMATION MESSAGES
ActionMessage
The selected drive
mode does not
allow you to turn on
the stabilizer bar
disconnect feature.
See G.O.A.T.
Mode Control
(page 242).
Sta-Bar Disconnect
Not Available In
Selected Drive
Mode
The stabilizer bar
has been discon-
nected.
Sta-Bar Discon-
nected Sta-Bar
Reconnects over 20
MPH
Sta-Bar Discon-
nected Sta-Bar
Reconnects over 32
km/h
The stabilizer bar
disconnect is avail-
able below 20 mph
(32 km/h).
Sta-Bar Disconnect
Available Below 20
MPH
Sta-Bar Disconnect
Available Below 32
km/h
215
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Stabilizer Bar Disconnect (If Equipped)