5. Push the tab inward when pulling down
to disconnect and remove the wiring
harness.
6. Push the release button on the hose
connector and pull down to remove
the washer hose.
7. Secure the wiring harness to the body
side by plugging it into the receptacle
and pushing up on the locking tab.
8. Secure the washer hose by snapping it
into the top of the body side
receptacle.
9. Remove the two fasteners that secure
the rear roof panel at the C-pillar using
the provided head driver and ratchet.
10. Remove the four fasteners on each
side of your vehicle that secure the
rear roof panel to the vehicle using
the provided head driver and ratchet.
11. With the tailgate window open, grab
the opening with one hand and
slightly lift with the other hand. Lift
the rear roof panel straight up and
off. Place the rear roof panel on a soft
surface to prevent damage.
353
2022 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Removable Vehicle Components
To Next Page
Loading...
