19
[ST10675( M)07/91]
❑
HEATING — Set fan speed at MEDIUM or
HIGH, the function selector knob on VENT,
FLOOR, FLR DEF or DEFROST symbol and
the temperature control knob on any desired
position.
[ST10850( M)07/91]
❑
AIR CONDITIONING — Set the fan speed at
MEDIUM or HIGH, the function selector
lever on NORM or VENT and the
temperature control knob on any desired
position.
[ST10865( M)06/90]
TAPPET NOISE
[ST10875( M)06/90]
It is normal for the oil to drain down from the
hydraulic tappets in your engine during
extended shutdown periods (overnight). As a
result, these tappets may clatter for a few
seconds after the engine starts until oil pressure
builds up. This momentary start-up noise is
normal and is not harmful to engine operation.
File:ltstm.ex
Update:Tue Jun 20 16:47:24 1995
To Next Page
Loading...
